Skip to content
FIXtags

FIX MESSAGE 35=l

BidResponse

MsgType (35) = lProgramTradingAdded FIX.4.2

Definition

The Bid Response message can be used in one of two ways depending on which market conventions are being followed. In the "Non disclosed" convention the Bid Response message can be used to supply a bid based on the sector, country, index and liquidity information contained within the corresponding bid request message. See "Program/Basket/List Trading" for an example. In the "Disclosed" convention the Bid Response message can be used to supply bids based on the List Order Detail messages sent in advance of the corresponding Bid Request message.

FIX 4.2 group names/IDs were assigned during the official Orchestra translation; some mappings to later versions are approximate. This layout stays within the 4.2 source.

Message structure 48 distinct fields

Source order, including nested components and groups. Group counts precede the repeated entries. “Required here” is relative to the enclosing component or group, not unconditional in the message. A dash means not marked required; conditional requirements remain in the source notes. This is a reference, not a counterparty-specific validator.

  1. StandardHeaderComponentRequired

    MsgType = l (lowercase L)

    StandardHeader definition & usage →

    1. 8 BeginStringStringRequired here

      FIX.4.2 (Always unencrypted, must be first field in message)

    2. 9 BodyLengthintRequired here

      (Always unencrypted, must be second field in message)

    3. 35 MsgTypeStringRequired here

      (Always unencrypted, must be third field in message)

    4. 49 SenderCompIDStringRequired here

      (Always unencrypted)

    5. 56 TargetCompIDStringRequired here

      (Always unencrypted)

    6. 115 OnBehalfOfCompIDString—

      Trading partner company ID used when sending messages via a third party (Can be embedded within encrypted data section.)

    7. 128 DeliverToCompIDString—

      Trading partner company ID used when sending messages via a third party (Can be embedded within encrypted data section.)

    8. 90 SecureDataLenint—

      Required to identify length of encrypted section of message. (Always unencrypted)

    9. 91 SecureDatadata—

      Required when message body is encrypted. Always immediately follows SecureDataLen field.

    10. 34 MsgSeqNumintRequired here

      (Can be embedded within encrypted data section.)

    11. 50 SenderSubIDString—

      (Can be embedded within encrypted data section.)

    12. 142 SenderLocationIDString—

      Sender's LocationID (i.e. geographic location and/or desk) (Can be embedded within encrypted data section.)

    13. 57 TargetSubIDString—

      "ADMIN" reserved for administrative messages not intended for a specific user. (Can be embedded within encrypted data section.)

    14. 143 TargetLocationIDString—

      Trading partner LocationID (i.e. geographic location and/or desk) (Can be embedded within encrypted data section.)

    15. 116 OnBehalfOfSubIDString—

      Trading partner SubID used when delivering messages via a third party. (Can be embedded within encrypted data section.)

    16. 144 OnBehalfOfLocationIDString—

      Trading partner LocationID (i.e. geographic location and/or desk) used when delivering messages via a third party. (Can be embedded within encrypted data section.)

    17. 129 DeliverToSubIDString—

      Trading partner SubID used when delivering messages via a third party. (Can be embedded within encrypted data section.)

    18. 145 DeliverToLocationIDString—

      Trading partner LocationID (i.e. geographic location and/or desk) used when delivering messages via a third party. (Can be embedded within encrypted data section.)

    19. 43 PossDupFlagBoolean—

      Always required for retransmitted messages, whether prompted by the sending system or as the result of a resend request. (Can be embedded within encrypted data section.)

    20. 97 PossResendBoolean—

      Required when message may be duplicate of another message sent under a different sequence number. (Can be embedded within encrypted data section.)

    21. 52 SendingTimeUTCTimestampRequired here

      (Can be embedded within encrypted data section.)

    22. 122 OrigSendingTimeUTCTimestamp—

      Required for message resent as a result of a ResendRequest. If data is not available set to same value as SendingTime (Can be embedded within encrypted data section.)

    23. 212 XmlDataLenint—

      Required when specifying XmlData to identify the length of a XmlData message block. (Can be embedded within encrypted data section.)

    24. 213 XmlDatadata—

      Can contain an XML-formatted message block (e.g. FIXML). Always immediately follows XmlDataLen field. (Can be embedded within encrypted data section.) See Appendix M – FIXML Support

    25. 347 MessageEncodingString—

      Type of message encoding (non-ASCII characters) used in a message’s "Encoded" fields. Required if any "Encoding" fields are used.

    26. 369 LastMsgSeqNumProcessedint—

      The last MsgSeqNum value received and processed. Can be specified on every message sent. Useful for detecting a backlog with a counterparty.

    27. 370 OnBehalfOfSendingTimeUTCTimestamp—

      Used when a message is sent via a "hub" or "service bureau". If A sends to Q (the hub) who then sends to B via a separate FIX session, then when Q sends to B the value of this field should represent the SendingTime on the message A sent to Q. (always expressed in UTC (Universal Time Coordinated, also known as "GMT")

  2. 390 BidIDString—
  3. 391 ClientBidIDString—
  4. BidCompRspGrpRepeating groupCount tag 420Required

    Number of bid repeating groups

    BidCompRspGrp definition & usage →

    1. 420 NoBidComponentsGroup countRequired here
    2. 12 CommissionAmtRequired here

      First element of price. Required if NoBidComponents > 0.

    3. 13 CommTypecharRequired here
    4. 66 ListIDString—
    5. 421 CountryString—

      ISO Country Code

    6. 54 Sidechar—

      When used in response to a "Disclosed" request indicates whether SideValue1 is Buy or Sell. SideValue2 can be derived by inference.

    7. 44 PricePrice—

      Second element of price

    8. 423 PriceTypeint—
    9. 406 FairValueAmt—

      The difference between the value of a future and the value of the underlying equities after allowing for the discounted cash flows associated with the underlying stocks (E.g. Dividends etc).

    10. 430 NetGrossIndint—

      Net/Gross

    11. 63 SettlmntTypchar—

      Indicates order settlement period for Detail.

    12. 64 FutSettDateLocalMktDate—
    13. 336 TradingSessionIDString—
    14. 58 TextString—
    15. 354 EncodedTextLenint—

      Must be set if EncodedText field is specified and must immediately precede it.

    16. 355 EncodedTextdata—

      Encoded (non-ASCII characters) representation of the Text field in the encoded format specified via the MessageEncoding field.

  5. StandardTrailerComponentRequired

    StandardTrailer definition & usage →

    1. 93 SignatureLengthint—

      Required when trailer contains signature. Note: Not to be included within SecureData field

    2. 89 Signaturedata—

      Note: Not to be included within SecureData field

    3. 10 CheckSumStringRequired here

      (Always unencrypted, always last field in message)