MassQuote

StandardHeader definition & usage →

1. 8 BeginStringStringRequired here

   FIXT.1.1 (Always unencrypted, must be first field in message)

2. 9 BodyLengthLengthRequired here

   (Always unencrypted, must be second field in message)

3. 35 MsgTypeStringRequired here

   (Always unencrypted, must be third field in message)

4. 1128 ApplVerIDString—

   Indicates application version using a service pack identifier. The ApplVerID applies to a specific message occurrence.

5. 1156 ApplExtIDint—
6. 1129 CstmApplVerIDString—

   Used to support bilaterally agreed custom functionality

7. 49 SenderCompIDStringRequired here

   (Always unencrypted)

8. 56 TargetCompIDStringRequired here

   (Always unencrypted)

9. 115 OnBehalfOfCompIDString—

   Trading partner company ID used when sending messages via a third party (Can be embedded within encrypted data section.)

10. 128 DeliverToCompIDString—

    Trading partner company ID used when sending messages via a third party (Can be embedded within encrypted data section.)

11. 90 SecureDataLenDeprecated FIXT.1.1Length—

    Required to identify length of encrypted section of message. (Always unencrypted)

12. 91 SecureDataDeprecated FIXT.1.1data—

    Required when message body is encrypted. Always immediately follows SecureDataLen field.

13. 34 MsgSeqNumSeqNumRequired here

    (Can be embedded within encrypted data section.)

14. 50 SenderSubIDString—

    (Can be embedded within encrypted data section.)

15. 142 SenderLocationIDString—

    Sender's LocationID (i.e. geographic location and/or desk) (Can be embedded within encrypted data section.)

16. 57 TargetSubIDString—

    "ADMIN" reserved for administrative messages not intended for a specific user. (Can be embedded within encrypted data section.)

17. 143 TargetLocationIDString—

    Trading partner LocationID (i.e. geographic location and/or desk) (Can be embedded within encrypted data section.)

18. 116 OnBehalfOfSubIDString—

    Trading partner SubID used when delivering messages via a third party. (Can be embedded within encrypted data section.)

19. 144 OnBehalfOfLocationIDString—

    Trading partner LocationID (i.e. geographic location and/or desk) used when delivering messages via a third party. (Can be embedded within encrypted data section.)

20. 129 DeliverToSubIDString—

    Trading partner SubID used when delivering messages via a third party. (Can be embedded within encrypted data section.)

21. 145 DeliverToLocationIDString—

    Trading partner LocationID (i.e. geographic location and/or desk) used when delivering messages via a third party. (Can be embedded within encrypted data section.)

22. 43 PossDupFlagBoolean—

    Always required for retransmitted messages, whether prompted by the sending system or as the result of a resend request. (Can be embedded within encrypted data section.)

23. 97 PossResendBoolean—

    Required when message may be duplicate of another message sent under a different sequence number. (Can be embedded within encrypted data section.)

24. 52 SendingTimeUTCTimestampRequired here

    (Can be embedded within encrypted data section.)

25. 122 OrigSendingTimeUTCTimestamp—

    Required for message resent as a result of a ResendRequest. If data is not available set to same value as SendingTime (Can be embedded within encrypted data section.)

26. 212 XmlDataLenLength—

    Required when specifying XmlData to identify the length of a XmlData message block. (Can be embedded within encrypted data section.)

27. 213 XmlDatadata—

    Can contain a XML formatted message block (e.g. FIXML). Always immediately follows XmlDataLen field. (Can be embedded within encrypted data section.) See Volume 1: FIXML Support

28. 347 MessageEncodingString—

    Type of message encoding (non-ASCII characters) used in a message's "Encoded" fields. Required if any "Encoding" fields are used.

29. 369 LastMsgSeqNumProcessedSeqNum—

    The last MsgSeqNum value received by the FIX engine and processed by downstream application, such as trading system or order routing system. Can be specified on every message sent. Useful for detecting a backlog with a counterparty.

30. HopGrpRepeating groupCount tag 627—

    Number of repeating groups of historical "hop" information. Only applicable if OnBehalfOfCompID is used, however, its use is optional. Note that some market regulations or counterparties may require tracking of message hops.

    HopGrp definition & usage →

    1. 627 NoHopsGroup count—
    2. 628 HopCompIDString—
    3. 629 HopSendingTimeUTCTimestamp—
    4. 630 HopRefIDSeqNum—

Parties definition & usage →

1. 453 NoPartyIDsGroup count—

   Repeating group below should contain unique combinations of PartyID, PartyIDSource, and PartyRole

2. 448 PartyIDString—

   Used to identify source of PartyID. Required if PartyIDSource is specified. Required if NoPartyIDs > 0.

3. 447 PartyIDSourcechar—

   Used to identify class source of PartyID value (e.g. BIC). Required if PartyID is specified. Required if NoPartyIDs > 0.

4. 452 PartyRoleint—

   Identifies the type of PartyID (e.g. Executing Broker). Required if NoPartyIDs > 0.

5. PtysSubGrpRepeating groupCount tag 802—

   Repeating group of Party sub-identifiers.

   PtysSubGrp definition & usage →

   1. 802 NoPartySubIDsGroup count—
   2. 523 PartySubIDString—
   3. 803 PartySubIDTypeint—

QuotSetGrp definition & usage →

1. 296 NoQuoteSetsGroup countRequired here

   The number of sets of quotes in the message

2. 302 QuoteSetIDStringRequired here

   Sequential number for the Quote Set. For a given QuoteID - assumed to start at 1. Must be the first field in the repeating group.

3. UnderlyingInstrumentComponent—

   UnderlyingInstrument definition & usage →

   1. 311 UnderlyingSymbolString—
   2. 312 UnderlyingSymbolSfxString—
   3. 309 UnderlyingSecurityIDString—
   4. 305 UnderlyingSecurityIDSourceString—
   5. UndSecAltIDGrpRepeating groupCount tag 457—

      UndSecAltIDGrp definition & usage →

      1. 457 NoUnderlyingSecurityAltIDGroup count—
      2. 458 UnderlyingSecurityAltIDString—
      3. 459 UnderlyingSecurityAltIDSourceString—
   6. 462 UnderlyingProductint—
   7. 463 UnderlyingCFICodeString—
   8. 310 UnderlyingSecurityTypeString—
   9. 763 UnderlyingSecuritySubTypeString—
   10. 313 UnderlyingMaturityMonthYearMonthYear—
   11. 542 UnderlyingMaturityDateLocalMktDate—
   12. 1213 UnderlyingMaturityTimeTZTimeOnly—
   13. 241 UnderlyingCouponPaymentDateLocalMktDate—
   14. 1453 UnderlyingRestructuringTypeString—
   15. 1454 UnderlyingSeniorityString—
   16. 1455 UnderlyingNotionalPercentageOutstandingPercentage—
   17. 1456 UnderlyingOriginalNotionalPercentageOutstandingPercentage—
   18. 1459 UnderlyingAttachmentPointPercentage—
   19. 1460 UnderlyingDetachmentPointPercentage—
   20. 242 UnderlyingIssueDateLocalMktDate—
   21. 243 UnderlyingRepoCollateralSecurityTypeDeprecated FIX.4.4String—
   22. 244 UnderlyingRepurchaseTermDeprecated FIX.4.4int—
   23. 245 UnderlyingRepurchaseRateDeprecated FIX.4.4Percentage—
   24. 246 UnderlyingFactorfloat—
   25. 256 UnderlyingCreditRatingString—
   26. 595 UnderlyingInstrRegistryString—
   27. 592 UnderlyingCountryOfIssueCountry—
   28. 593 UnderlyingStateOrProvinceOfIssueString—
   29. 594 UnderlyingLocaleOfIssueString—
   30. 247 UnderlyingRedemptionDateDeprecated FIX.4.4LocalMktDate—
   31. 316 UnderlyingStrikePricePrice—
   32. 941 UnderlyingStrikeCurrencyCurrency—
   33. 317 UnderlyingOptAttributechar—
   34. 436 UnderlyingContractMultiplierfloat—
   35. 1437 UnderlyingContractMultiplierUnitint—
   36. 1441 UnderlyingFlowScheduleTypeint—
   37. 998 UnderlyingUnitOfMeasureString—
   38. 1423 UnderlyingUnitOfMeasureQtyQty—
   39. 1424 UnderlyingPriceUnitOfMeasureString—
   40. 1425 UnderlyingPriceUnitOfMeasureQtyQty—
   41. 1000 UnderlyingTimeUnitString—

       Used to indicate a time unit for the contract (e.g., days, weeks, months, etc.)

   42. 1419 UnderlyingExerciseStyleint—
   43. 435 UnderlyingCouponRatePercentage—
   44. 308 UnderlyingSecurityExchangeExchange—
   45. 306 UnderlyingIssuerString—
   46. 362 EncodedUnderlyingIssuerLenLength—
   47. 363 EncodedUnderlyingIssuerdata—
   48. 307 UnderlyingSecurityDescString—
   49. 364 EncodedUnderlyingSecurityDescLenLength—
   50. 365 EncodedUnderlyingSecurityDescdata—
   51. 877 UnderlyingCPProgramString—
   52. 878 UnderlyingCPRegTypeString—
   53. 972 UnderlyingAllocationPercentPercentage—

       Specific to the < UnderlyingInstrument > Percent of the Strike Price that this underlying represents. Necessary for derivatives that deliver into more than one underlying instrument.

   54. 318 UnderlyingCurrencyCurrency—

       Specific to the <UnderlyingInstrument> (not in <Instrument>)

   55. 879 UnderlyingQtyQty—

       Specific to the <UnderlyingInstrument> (not in <Instrument>) Unit amount of the underlying security (par, shares, currency, etc.)

   56. 975 UnderlyingSettlementTypeint—

       Specific to the < UnderlyingInstrument > Indicates order settlement period for the underlying deliverable component.

   57. 973 UnderlyingCashAmountAmt—

       Specific to the < UnderlyingInstrument > Cash amount associated with the underlying component. Necessary for derivatives that deliver into more than one underlying instrument and one of the underlying's is a fixed cash value.

   58. 974 UnderlyingCashTypeString—

       Specific to the < UnderlyingInstrument > Used for derivatives that deliver into cash underlying. Indicates that the cash is either fixed or difference value (difference between strike and current underlying price)

   59. 810 UnderlyingPxPrice—

       Specific to the <UnderlyingInstrument> (not in <Instrument>) In a financing deal clean price (percent-of-par or per unit) of the underlying security or basket.

   60. 882 UnderlyingDirtyPricePrice—

       Specific to the <UnderlyingInstrument> (not in <Instrument>) In a financing deal price (percent-of-par or per unit) of the underlying security or basket. "Dirty" means it includes accrued interest

   61. 883 UnderlyingEndPricePrice—

       Specific to the <UnderlyingInstrument> (not in <Instrument>) In a financing deal price (percent-of-par or per unit) of the underlying security or basket at the end of the agreement.

   62. 884 UnderlyingStartValueAmt—

       Specific to the <UnderlyingInstrument> (not in <Instrument>) Currency value attributed to this collateral at the start of the agreement

   63. 885 UnderlyingCurrentValueAmt—

       Specific to the <UnderlyingInstrument> (not in <Instrument>) Currency value currently attributed to this collateral

   64. 886 UnderlyingEndValueAmt—

       Specific to the <UnderlyingInstrument> (not in <Instrument>) Currency value attributed to this collateral at the end of the agreement

   65. UnderlyingStipulationsRepeating groupCount tag 887—

       Specific to the <UnderlyingInstrument> (not in <Instrument>)

       UnderlyingStipulations definition & usage →

       1. 887 NoUnderlyingStipsGroup count—
       2. 888 UnderlyingStipTypeString—

          Required if NoUnderlyingStips >0

       3. 889 UnderlyingStipValueString—
   66. 1044 UnderlyingAdjustedQuantityQty—

       Specific to the <UnderlyingInstrument> (not in <Instrument>). For listed derivatives margin management, this is the number of shares adjusted for upcoming corporate action. Used only for securities which are optionable and are between ex-date and settlement date (4 days).

   67. 1045 UnderlyingFXRatefloat—

       Specific to the <UnderlyingInstrument> (not in <Instrument>). Foreign exchange rate used to compute UnderlyingCurrentValue (885) (or market value) from UnderlyingCurrency (318) to Currency (15).

   68. 1046 UnderlyingFXRateCalcchar—

       Specific to the <UnderlyingInstrument> (not in <Instrument>). Specified whether UnderlyingFxRate (1045) should be multiplied or divided to derive UnderlyingCurrentValue (885).

   69. 1038 UnderlyingCapValueAmt—
   70. UndlyInstrumentPartiesRepeating groupCount tag 1058—

       UndlyInstrumentParties definition & usage →

       1. 1058 NoUndlyInstrumentPartiesGroup count—

          Repeating group below should contain unique combinations of InstrumentPartyID, InstrumentPartyIDSource, and InstrumentPartyRole

       2. 1059 UnderlyingInstrumentPartyIDString—

          Used to identify party id related to instrument

       3. 1060 UnderlyingInstrumentPartyIDSourcechar—

          Used to identify source of instrument party id

       4. 1061 UnderlyingInstrumentPartyRoleint—

          Used to identify the role of instrument party id

       5. UndlyInstrumentPtysSubGrpRepeating groupCount tag 1062—

          Repeating group of InstrumentParty sub-identifiers.

          UndlyInstrumentPtysSubGrp definition & usage →

          1. 1062 NoUndlyInstrumentPartySubIDsGroup count—
          2. 1063 UnderlyingInstrumentPartySubIDString—
          3. 1064 UnderlyingInstrumentPartySubIDTypeint—
   71. 1039 UnderlyingSettlMethodString—
   72. 315 UnderlyingPutOrCallint—

       Used to express option right

4. 367 QuoteSetValidUntilTimeUTCTimestamp—
5. 304 TotNoQuoteEntriesintRequired here

   Total number of quotes for the quote set across all messages. Should be the sum of all NoQuoteEntries in each message that has repeating quotes that are part of the same quote set.

6. 893 LastFragmentBoolean—

   Indicates whether this is the last fragment in a sequence of message fragments. Only required where message has been fragmented.

7. QuotEntryGrpRepeating groupCount tag 295Required here

   QuotEntryGrp definition & usage →

   1. 295 NoQuoteEntriesGroup countRequired here

      The number of quotes for this Symbol (instrument) (QuoteSet) that follow in this message.

   2. 299 QuoteEntryIDStringRequired here

      Uniquely identifies the quote across the complete set of all quotes for a given quote provider.

   3. InstrumentComponent—

      Instrument definition & usage →

      1. 55 SymbolString—

         Common, "human understood" representation of the security. SecurityID value can be specified if no symbol exists (e.g. non-exchange traded Collective Investment Vehicles) Use "[N/A]" for products which do not have a symbol.

      2. 65 SymbolSfxString—

         Used in Fixed Income with a value of "WI" to indicate "When Issued" for a security to be reissued under an old CUSIP or ISIN or with a value of "CD" to indicate a EUCP with lump-sum interest rather than discount price.

      3. 48 SecurityIDString—

         Takes precedence in identifying security to counterparty over SecurityAltID block. Requires SecurityIDSource if specified.

      4. 22 SecurityIDSourceString—

         Required if SecurityID is specified.

      5. SecAltIDGrpRepeating groupCount tag 454—

         Number of alternate Security Identifiers

         SecAltIDGrp definition & usage →

         1. 454 NoSecurityAltIDGroup count—
         2. 455 SecurityAltIDString—
         3. 456 SecurityAltIDSourceString—
      6. 460 Productint—

         Indicates the type of product the security is associated with (high-level category)

      7. 1227 ProductComplexString—

         Identifies an entire suite of products for a given market. In Futures this may be "interest rates", "agricultural", "equity indexes", etc

      8. 1151 SecurityGroupString—

         An exchange specific name assigned to a group of related securities which may be concurrently affected by market events and actions.

      9. 461 CFICodeString—

         Indicates the type of security using ISO 10962 standard, Classification of Financial Instruments (CFI code) values. It is recommended that CFICode be used instead of SecurityType for non-Fixed Income instruments.

      10. 167 SecurityTypeString—

          It is recommended that CFICode be used instead of SecurityType for non-Fixed Income instruments. Required for Fixed Income. Refer to Volume 7 - Fixed Income Futures and Options should be specified using the CFICode[461] field instead of SecurityType[167] (Refer to Volume 7 - Recommendations and Guidelines for Futures and Options Markets.)

      11. 762 SecuritySubTypeString—

          Sub-type qualification/identification of the SecurityType (e.g. for SecurityType="MLEG"). If specified, SecurityType is required.

      12. 200 MaturityMonthYearMonthYear—

          Specifies the month and year of maturity. Applicable for standardized derivatives which are typically only referenced by month and year (e.g. S&P futures). Note MaturityDate (a full date) can also be specified.

      13. 541 MaturityDateLocalMktDate—

          Specifies date of maturity (a full date). Note that standardized derivatives which are typically only referenced by month and year (e.g. S&amp;P futures).may use MaturityMonthYear and/or this field. When using MaturityMonthYear, it is recommended that markets and sell sides report the MaturityDate on all outbound messages as a means of data enrichment. For NDFs this represents the fixing date of the contract.

      14. 1079 MaturityTimeTZTimeOnly—

          For NDFs this represents the fixing time of the contract. It is optional to specify the fixing time.

      15. 966 SettleOnOpenFlagString—

          Indicator to determine if Instrument is Settle on Open.

      16. 1049 InstrmtAssignmentMethodchar—
      17. 965 SecurityStatusString—

          Gives the current state of the instrument

      18. 224 CouponPaymentDateLocalMktDate—

          Date interest is to be paid. Used in identifying Corporate Bond issues.

      19. 1449 RestructuringTypeString—
      20. 1450 SeniorityString—
      21. 1451 NotionalPercentageOutstandingPercentage—
      22. 1452 OriginalNotionalPercentageOutstandingPercentage—
      23. 1457 AttachmentPointPercentage—
      24. 1458 DetachmentPointPercentage—
      25. 225 IssueDateLocalMktDate—

          Date instrument was issued. For Fixed Income IOIs for new issues, specifies the issue date.

      26. 239 RepoCollateralSecurityTypeDeprecated FIX.4.4String—
      27. 226 RepurchaseTermDeprecated FIX.4.4int—
      28. 227 RepurchaseRateDeprecated FIX.4.4Percentage—
      29. 228 Factorfloat—

          For Fixed Income: Amortization Factor for deriving Current face from Original face for ABS or MBS securities, note the fraction may be greater than, equal to or less than 1. In TIPS securities this is the Inflation index. Qty * Factor * Price = Gross Trade Amount For Derivatives: Contract Value Factor by which price must be adjusted to determine the true nominal value of one futures/options contract. (Qty * Price) * Factor = Nominal Value

      30. 255 CreditRatingString—
      31. 543 InstrRegistryString—

          The location at which records of ownership are maintained for this instrument, and at which ownership changes must be recorded. Can be used in conjunction with ISIN to address ISIN uniqueness issues.

      32. 470 CountryOfIssueCountry—

          ISO Country code of instrument issue (e.g. the country portion typically used in ISIN). Can be used in conjunction with non-ISIN SecurityID (e.g. CUSIP for Municipal Bonds without ISIN) to provide uniqueness.

      33. 471 StateOrProvinceOfIssueString—

          A two-character state or province abbreviation.

      34. 472 LocaleOfIssueString—

          The three-character IATA code for a locale (e.g. airport code for Municipal Bonds).

      35. 240 RedemptionDateDeprecated FIX.4.4LocalMktDate—
      36. 202 StrikePricePrice—

          Used for derivatives, such as options and covered warrants

      37. 947 StrikeCurrencyCurrency—

          Used for derivatives

      38. 967 StrikeMultiplierfloat—

          Used for derivatives. Multiplier applied to the strike price for the purpose of calculating the settlement value.

      39. 968 StrikeValuefloat—

          Used for derivatives. The number of shares/units for the financial instrument involved in the option trade.

      40. 1478 StrikePriceDeterminationMethodint—
      41. 1479 StrikePriceBoundaryMethodint—
      42. 1480 StrikePriceBoundaryPrecisionPercentage—
      43. 1481 UnderlyingPriceDeterminationMethodint—
      44. 206 OptAttributechar—

          Used for derivatives, such as options and covered warrants to indicate a versioning of the contract when required due to corporate actions to the underlying. Should not be used to indicate type of option - use the CFICode[461] for this purpose.

      45. 231 ContractMultiplierfloat—

          For Fixed Income, Convertible Bonds, Derivatives, etc. Note: If used, quantities should be expressed in the "nominal" (e.g. contracts vs. shares) amount.

      46. 1435 ContractMultiplierUnitint—
      47. 1439 FlowScheduleTypeint—
      48. 969 MinPriceIncrementfloat—

          Minimum price increment for the instrument. Could also be used to represent tick value.

      49. 1146 MinPriceIncrementAmountAmt—

          Minimum price increment amount associated with the MinPriceIncrement [969]. For listed derivatives, the value can be calculated by multiplying MinPriceIncrement by ContractValueFactor [231]

      50. 996 UnitOfMeasureString—

          0

      51. 1147 UnitOfMeasureQtyQty—
      52. 1191 PriceUnitOfMeasureString—
      53. 1192 PriceUnitOfMeasureQtyQty—
      54. 1193 SettlMethodchar—

          Settlement method for a contract. Can be used as an alternative to CFI Code value

      55. 1194 ExerciseStyleint—

          Type of exercise of a derivatives security

      56. 1482 OptPayoutTypeint—
      57. 1195 OptPayoutAmountAmt—

          Cash amount indicating the pay out associated with an option. For binary options this is a fixed amount

      58. 1196 PriceQuoteMethodString—

          Method for price quotation

      59. 1197 ValuationMethodString—

          Indicates type of valuation method used.

      60. 1198 ListMethodint—

          Indicates whether the instruments are pre-listed only or can also be defined via user request

      61. 1199 CapPricePrice—

          Used to express the ceiling price of a capped call

      62. 1200 FloorPricePrice—

          Used to express the floor price of a capped put

      63. 201 PutOrCallint—

          Used to express option right

      64. 1244 FlexibleIndicatorBoolean—

          Used to indicate if a security has been defined as flexible according to "non-standard" means. Analog to CFICode Standard/Non-standard indicator

      65. 1242 FlexProductEligibilityIndicatorBoolean—

          Used to indicate if a product or group of product supports the creation of flexible securities

      66. 997 TimeUnitString—

          Used to indicate a time unit for the contract (e.g., days, weeks, months, etc.)

      67. 223 CouponRatePercentage—

          For Fixed Income.

      68. 207 SecurityExchangeExchange—

          Can be used to identify the security.

      69. 970 PositionLimitint—

          Position Limit for the instrument.

      70. 971 NTPositionLimitint—

          Near-term Position Limit for the instrument.

      71. 106 IssuerString—
      72. 348 EncodedIssuerLenLength—

          Must be set if EncodedIssuer field is specified and must immediately precede it.

      73. 349 EncodedIssuerdata—

          Encoded (non-ASCII characters) representation of the Issuer field in the encoded format specified via the MessageEncoding field.

      74. 107 SecurityDescString—
      75. 350 EncodedSecurityDescLenLength—

          Must be set if EncodedSecurityDesc field is specified and must immediately precede it.

      76. 351 EncodedSecurityDescdata—

          Encoded (non-ASCII characters) representation of the SecurityDesc field in the encoded format specified via the MessageEncoding field.

      77. SecurityXMLComponent—

          Embedded XML document describing security.

          SecurityXML definition & usage →

          1. 1184 SecurityXMLLenLength—

             Must be set if SecurityXML field is specified and must immediately precede it.

          2. 1185 SecurityXMLXMLData—

             XML payload or content describing the Security information.

          3. 1186 SecurityXMLSchemaString—

             XML Schema used to validate the XML used to describe the Security.

      78. 691 PoolString—

          Identifies MBS / ABS pool

      79. 667 ContractSettlMonthMonthYear—

          Must be present for MBS/TBA

      80. 875 CPProgramint—

          The program under which a commercial paper is issued

      81. 876 CPRegTypeString—

          The registration type of a commercial paper issuance

      82. EvntGrpRepeating groupCount tag 864—

          Number of repeating EventType group entries.

          EvntGrp definition & usage →

          1. 864 NoEventsGroup count—
          2. 865 EventTypeint—
          3. 866 EventDateLocalMktDate—
          4. 1145 EventTimeUTCTimestamp—

             Specific time of event. To be used in combination with EventDate [866]

          5. 867 EventPxPrice—
          6. 868 EventTextString—
      83. 873 DatedDateLocalMktDate—

          If different from IssueDate

      84. 874 InterestAccrualDateLocalMktDate—

          If different from IssueDate and DatedDate

      85. InstrumentPartiesRepeating groupCount tag 1018—

          Used to identify the parties listing a specific instrument

          InstrumentParties definition & usage →

          1. 1018 NoInstrumentPartiesGroup count—

             Repeating group below should contain unique combinations of InstrumentPartyID, InstrumentPartyIDSource, and InstrumentPartyRole

          2. 1019 InstrumentPartyIDString—

             Used to identify party id related to instrument

          3. 1050 InstrumentPartyIDSourcechar—

             Used to identify source of instrument party id

          4. 1051 InstrumentPartyRoleint—

             Used to identify the role of instrument party id

          5. InstrumentPtysSubGrpRepeating groupCount tag 1052—

             Repeating group of InstrumentParty sub-identifiers.

             InstrumentPtysSubGrp definition & usage →

             1. 1052 NoInstrumentPartySubIDsGroup count—
             2. 1053 InstrumentPartySubIDString—
             3. 1054 InstrumentPartySubIDTypeint—
      86. ComplexEventsRepeating groupCount tag 1483—

          ComplexEvents definition & usage →

          1. 1483 NoComplexEventsGroup count—

             Number of complex events

          2. 1484 ComplexEventTypeint—

             Identifies the type of complex event. Required if NoComplexEvents > 0.

          3. 1485 ComplexOptPayoutAmountAmt—
          4. 1486 ComplexEventPricePrice—
          5. 1487 ComplexEventPriceBoundaryMethodint—
          6. 1488 ComplexEventPriceBoundaryPrecisionPercentage—
          7. 1489 ComplexEventPriceTimeTypeint—
          8. 1490 ComplexEventConditionint—

             ComplexEventCondition is conditionally required when there are more than one ComplexEvent occurrences. A chain of ComplexEvents must be linked together through use of the ComplexEventCondition in which the relationship between any two events is described. For any two ComplexEvents the first occurrence will specify the ComplexEventCondition which links it with the second event.

          9. ComplexEventDatesRepeating groupCount tag 1491—

             Used to specify the dates and time ranges when a complex event is in effect.

             ComplexEventDates definition & usage →

             1. 1491 NoComplexEventDatesGroup count—

                Number of complex event date occurrences for a given complex event.

             2. 1492 ComplexEventStartDateUTCTimestamp—

                Required if NoComplexEventDates(1491) > 0.

             3. 1493 ComplexEventEndDateUTCTimestamp—

                Required if NoComplexEventDates(1491) > 0.

             4. ComplexEventTimesRepeating groupCount tag 1494—

                ComplexEventTimes definition & usage →

                1. 1494 NoComplexEventTimesGroup count—
                2. 1495 ComplexEventStartTimeUTCTimeOnly—

                   Required if NoComplexEventTimes(1494) > 0.

                3. 1496 ComplexEventEndTimeUTCTimeOnly—

                   Required if NoComplexEventTimes(1494) > 0.

   4. InstrmtLegGrpRepeating groupCount tag 555—

      InstrmtLegGrp definition & usage →

      1. 555 NoLegsGroup count—

         Number of legs

      2. InstrumentLegComponent—

         Must be provided if Number of legs > 0

         InstrumentLeg definition & usage →

         1. 600 LegSymbolString—
         2. 601 LegSymbolSfxString—
         3. 602 LegSecurityIDString—
         4. 603 LegSecurityIDSourceString—
         5. LegSecAltIDGrpRepeating groupCount tag 604—

            LegSecAltIDGrp definition & usage →

            1. 604 NoLegSecurityAltIDGroup count—
            2. 605 LegSecurityAltIDString—
            3. 606 LegSecurityAltIDSourceString—
         6. 607 LegProductint—
         7. 608 LegCFICodeString—
         8. 609 LegSecurityTypeString—
         9. 764 LegSecuritySubTypeString—
         10. 610 LegMaturityMonthYearMonthYear—
         11. 611 LegMaturityDateLocalMktDate—
         12. 1212 LegMaturityTimeTZTimeOnly—
         13. 248 LegCouponPaymentDateLocalMktDate—
         14. 249 LegIssueDateLocalMktDate—
         15. 250 LegRepoCollateralSecurityTypeDeprecated FIX.4.4String—
         16. 251 LegRepurchaseTermDeprecated FIX.4.4int—
         17. 252 LegRepurchaseRateDeprecated FIX.4.4Percentage—
         18. 253 LegFactorfloat—
         19. 257 LegCreditRatingString—
         20. 599 LegInstrRegistryString—
         21. 596 LegCountryOfIssueCountry—
         22. 597 LegStateOrProvinceOfIssueString—
         23. 598 LegLocaleOfIssueString—
         24. 254 LegRedemptionDateDeprecated FIX.4.4LocalMktDate—
         25. 612 LegStrikePricePrice—
         26. 942 LegStrikeCurrencyCurrency—
         27. 613 LegOptAttributechar—
         28. 614 LegContractMultiplierfloat—
         29. 1436 LegContractMultiplierUnitint—
         30. 1440 LegFlowScheduleTypeint—
         31. 999 LegUnitOfMeasureString—
         32. 1224 LegUnitOfMeasureQtyQty—
         33. 1421 LegPriceUnitOfMeasureString—
         34. 1422 LegPriceUnitOfMeasureQtyQty—
         35. 1001 LegTimeUnitString—

             Used to indicate a time unit for the contract (e.g., days, weeks, months, etc.)

         36. 1420 LegExerciseStyleint—
         37. 615 LegCouponRatePercentage—
         38. 616 LegSecurityExchangeExchange—
         39. 617 LegIssuerString—
         40. 618 EncodedLegIssuerLenLength—
         41. 619 EncodedLegIssuerdata—
         42. 620 LegSecurityDescString—
         43. 621 EncodedLegSecurityDescLenLength—
         44. 622 EncodedLegSecurityDescdata—
         45. 623 LegRatioQtyfloat—

             Specific to the <InstrumentLeg> (not in <Instrument>)

         46. 624 LegSidechar—

             Specific to the <InstrumentLeg> (not in <Instrument>)

         47. 556 LegCurrencyCurrency—

             Specific to the <InstrumentLeg> (not in <Instrument>)

         48. 740 LegPoolString—

             Identifies MBS / ABS pool

         49. 739 LegDatedDateLocalMktDate—
         50. 955 LegContractSettlMonthMonthYear—
         51. 956 LegInterestAccrualDateLocalMktDate—
         52. 1358 LegPutOrCallint—

             Used to express option right

         53. 1017 LegOptionRatiofloat—

             LegOptionRatio is provided on covering leg to create a delta neutral spread. In Listed Derivatives, the delta of the leg is multiplied by LegOptionRatio and OrderQty to determine the covering quantity.

         54. 566 LegPricePrice—

             Used to specify an anchor price for a leg as part of the definition or creation of the strategy - not used for execution price.

   5. 132 BidPxPrice—

      If F/X quote, should be the "all-in" rate (spot rate adjusted for forward points). Note that either BidPx, OfferPx or both must be specified.

   6. 133 OfferPxPrice—

      If F/X quote, should be the "all-in" rate (spot rate adjusted for forward points). Note that either BidPx, OfferPx or both must be specified.

   7. 134 BidSizeQty—
   8. 135 OfferSizeQty—
   9. 62 ValidUntilTimeUTCTimestamp—
   10. 188 BidSpotRatePrice—

       May be applicable for F/X quotes

   11. 190 OfferSpotRatePrice—

       May be applicable for F/X quotes

   12. 189 BidForwardPointsPriceOffset—

       May be applicable for F/X quotes

   13. 191 OfferForwardPointsPriceOffset—

       May be applicable for F/X quotes

   14. 631 MidPxPrice—
   15. 632 BidYieldPercentage—
   16. 633 MidYieldPercentage—
   17. 634 OfferYieldPercentage—
   18. 60 TransactTimeUTCTimestamp—
   19. 336 TradingSessionIDString—
   20. 625 TradingSessionSubIDString—
   21. 64 SettlDateLocalMktDate—

       Can be used with forex quotes to specify a specific "value date"

   22. 40 OrdTypechar—

       Can be used to specify the type of order the quote is for

   23. 193 SettlDate2Deprecated FIX.5.0LocalMktDate—

       Can be used with OrdType = "Forex - Swap" to specify the "value date" for the future portion of a F/X swap.

   24. 192 OrderQty2Deprecated FIX.5.0Qty—

       Can be used with OrdType = "Forex - Swap" to specify the order quantity for the future portion of a F/X swap.

   25. 642 BidForwardPoints2Deprecated FIX.5.0PriceOffset—

       Bid F/X forward points of the future portion of a F/X swap quote added to spot rate. May be a negative value

   26. 643 OfferForwardPoints2Deprecated FIX.5.0PriceOffset—

       Offer F/X forward points of the future portion of a F/X swap quote added to spot rate. May be a negative value

   27. 15 CurrencyCurrency—

       Can be used to specify the currency of the quoted price.

   28. 775 BookingTypeint—
   29. 528 OrderCapacitychar—
   30. 529 OrderRestrictionsMultipleCharValue—

StandardTrailer definition & usage →

1. 93 SignatureLengthDeprecated FIXT.1.1Length—

   Required when trailer contains signature. Note: Not to be included within SecureData field

2. 89 SignatureDeprecated FIXT.1.1data—

   Note: Not to be included within SecureData field

3. 10 CheckSumStringRequired here

   (Always unencrypted, always last field in message)